To Next PageTo Next Page
Need help?Do you have a question about the Tadano GT-550E-2 and is the answer not in the manual?
General rules, operator qualifications, and essential precautions for safe crane operation.
Crucial steps for setting outriggers on firm ground and leveling the crane.
Adhering to lifting capacity, safety devices, pre-lift checks, and proper load handling.
Procedures for operating in various weather conditions and near hazards like power lines.
Guidelines for multi-crane lifts, special operations, and safe road travel.
Precautions for safe inspection, maintenance, and component handling.
Safety measures for ventilation, fire prevention, electrical systems, and battery handling.
Procedures for starting with booster cables, battery fluid, and tire pressure adjustments.
Overview and importance of warning labels on the machine.
Definitions of important terms like load radius, lifting height, and rated capacity.
Essential steps for crane travel, operation, and shutdown.
How to read working radius charts, capacity tables, and working area diagrams.
Details on AML functions, system configuration, controls, and displays.
How to select status, perform pre-op checks, and use working range limits.
Procedures for recovery from AML stops and interpreting failure messages.
Explains overwind cutout device and front jack overload warning.
Procedures for starting and stopping the crane engine.
How to operate the PTO and warm up the machine before operation.
Procedures for setting outriggers on firm ground and leveling the crane.
Procedures for operating the front jack and stowing the outriggers.
General rules, operator qualifications, and essential precautions for safe crane operation.
Crucial steps for setting outriggers on firm ground and leveling the crane.
Adhering to lifting capacity, safety devices, pre-lift checks, and proper load handling.
Procedures for operating in various weather conditions and near hazards like power lines.
Guidelines for multi-crane lifts, special operations, and safe road travel.
Precautions for safe inspection, maintenance, and component handling.
Safety measures for ventilation, fire prevention, electrical systems, and battery handling.
Procedures for starting with booster cables, battery fluid, and tire pressure adjustments.
Overview and importance of warning labels on the machine.
Definitions of important terms like load radius, lifting height, and rated capacity.
Essential steps for crane travel, operation, and shutdown.
How to read working radius charts, capacity tables, and working area diagrams.
Details on AML functions, system configuration, controls, and displays.
How to select status, perform pre-op checks, and use working range limits.
Procedures for recovery from AML stops and interpreting failure messages.
Explains overwind cutout device and front jack overload warning.
Procedures for starting and stopping the crane engine.
How to operate the PTO and warm up the machine before operation.
Procedures for setting outriggers on firm ground and leveling the crane.
Procedures for operating the front jack and stowing the outriggers.
General| Brand | Tadano |
|---|---|
| Model | GT-550E-2 |
| Category | Construction Equipment |
| Language | English |
