tado° RU01 - Compatibility

tado° – Technical Documentation V1.0
2
Product Overview
tado° Additional Thermostat
• Additional themostat for heating systems with
serveral zones.
• One thermostat is required per zone.
3
tado° Additional Thermostat
tado° Additional Thermostat accessories
+
Labels
Sticky pads
Screws
wall plugs
Housing screw AAA Batteries
Compatibility
tado° is compatible with almost all central heating systems, including:
• combi, system and heat-only boilers
• conventional and condensing boilers
• common Y-, S- and W-plan setups
• hydronic underoor systems
• electric underoor systems with a maximum switching current of 6 A
• air source and ground source heat pumps (heating only)
• zoned systems (one Smart Thermostat per zone)
• switched live systems
• potential free (dry contact) systems
• low voltage systems with analog interfaces
• low voltage systems with digital bus interfaces
tado°s compatibility with specic heating systems can be checked on
tado.com/check
Compatibility