Instrucon & Operang Manual
TA-05/C
ETA-05C.PMD PT
Misprints and technical changes reserved
TAE Antriebstechnik
4
Copyright © by TAE Antriebstechnik
1. Instructions of safety
Before you put the device into operation, please read this instruction and
operation manual completely. The operation should only be done by quali-
fied personal.
The precautions and warnings below must be observed at the operation of
the device.
1.1 Instructions and Rules
These guidelines for installation have been compiled with regard to the following stan-
dards
DIN VDE 0100 Erection of power installations with nominal voltage up to 1000 V
VDE 0113 Electrical equipment for machines
VDE 0160 Electronic equipment to be used in electrical power installations
VDE 0470 Part 1 Protection by frame
1.2 Safety
Caution - Danger !
Disconnect device from mains before making any repairs. After the installa-
tion make sure that the device is properly grounded in order to avoid elec-
trical hazzards!
As with any form of electrical equipment, there is always a risk involved in
the handling of electrical machinery.
The greatest care must always be exercised during installation and
maintenance. It is recommended that service is performed by authorized
personnel only.
To Next Page
Loading...
Need help?
General