Taga 2.0 - Riding Taga 2.0: Safety Check

20
Storing Taga 2.0 in a car trunk
In a large car such as SUV, Minivan or Estate – position the parts in a way that they
don’t touch each other or use a blanket to separate the parts to avoid scratches
or damages.
FIG 41
In a small car such as sedan, you will need to fold one of the rear seats so you can
place the rear frame lengthways. Then position all other parts
FIG 41
Remove
the wheels if needed, to save space
Using a Car Bike Rack
To transport the Taga 2.0 on a car bike rack, use a high mount rack with arms that
are positioned at least 150cm/ 59” from the ground.
FIG 42
1. Remove the Cargo Compartment as shown in step 1 in the Storage section
and in
FIG 35
. Fold the basket as shown in
FIG 36
and store both in the
car trunk
2. Open the quick release levers on the steering posts and dismantle the
steering posts. Then fix them to front frame with bungee cords, rope or
straps.
FIG 42
3. Mount the bike on the rack in such a way that the rack arms are positioned
in-between the front frame and the steering rod, to avoid damage to the
steering rod
FIG 42
4. Open the quick release lever on the seat tube, pull the seat post out and re-
attach it from the other side of seat tube, so that the saddle is facing the car
and works as a bumper between the bike and the car.
FIG 42
5. Use straps or bungee cords to secure the bike to the rack and the car
6. Test the bike to ensure it is properly fastened to the rack and the car
Riding Taga 2.0
Taga 2.0 allows you to ride easily and safely with your children while carrying
groceries or personal items, turning every journey into an adventure. Enjoy the
ride!
Safety Check:
Before every ride or if you feel something is wrong with your Taga, check the
following:
 Squeeze the rear brake lever and push Taga forward while pressing down
on the saddle. Does the rear wheel rotate? If yes, it is time to adjust the rear
brake.
For this you can contact us directly, contact your local reseller or make the