A - 4 Servicing Tait Orca 5000 handportables
09/01 IPN: M5000-00-102
programming lead for connecting the
calibration test unit to a PC (TOPA-SV-
012);
■ DC service adaptor (TOPA-SV-005);
■ SMA to N-type RF test lead for connecting
to the radio’s antenna connector (TOPA-
SV-006);
■ T6 driver bit and 8 mm socket (TOPA-SV-
011);
■ this manual; and
■ TOP Programming Utilities (TPU) CD-
ROM (IPN 406-00003-xx).
Other items required for calibration but not
included as part of the service kit are:
■ RF communications test set (e.g. HP8920,
MI2945/55, CMS52);
■ digital current meter capable of measur-
ing current up to 3 A, accurate to two
decimal places.;
■ DC power supply, 7.5 V, 3 A for handport-
ables; and
■ TOPA-SV-A07 if calibrating TOP-Axxxx-
xx 66 -88MHz product.
Programming kit
The TOPA-SV-116 kit for programming Tait
Orca 5000 radios contains:
■ accessory connector to modular phone
socket programming cable for connecting
the radio to the programming lead
(TOPA-SV-003); and
■ 25 pin RS232 to modular phone jack
programming lead for connecting the
programming cable to a PC (TOPA-SV-
012); and
■ TOP Programming Utilities (TPU) CD-
ROM (IPN 406-00003-xx).
Conventions
Throughout this manual, the names of
software screen, field and menu names are
referred to in bold sans serif font. For
example:
Check that the information in the Radio Model
fields (Specifications screen) is correct.
To Next Page
Loading...
