To Next PageTo Next Page
Need help?Do you have a question about the Tait T2000-300 and is the answer not in the manual?
General| IP Rating | IP54 |
|---|---|
| Operating Temperature | -30°C to +60°C |
| Power Output | 5W |
| Channel spacing | 12.5/25 kHz |
| RF Output Power | 5W |
Details on new PCBs, parts list updates, and new accessory kits included in this revision.
Explains manual format, revision process, and how changes are indicated.
Covers essential safety precautions, handling, and warnings for servicing.
Details on disassembling the radio and general repair techniques for components.
Lists the necessary equipment for performing functional tests on the radios.
Procedures for testing receiver performance characteristics.
Covers checks for components, DC, and RF sections for troubleshooting.
Detailed part list and information for the T2000-100 RF PCB.
Covers precautions for Beryllium Oxide, CMOS devices, and screw types.
Specific steps for detaching the control head in locally mounted configurations.
Specific steps for detaching the control head in remotely mounted configurations.
Covers procedures for testing receiver and transmitter performance parameters.
Details tuning precautions and identifies specific adjustment points.
Guides for adjusting transmitter and receiver parameters.
Lists the various PCBs covered in this section with their IPNs and pages.
Information and specifications for the T2008 Power Supply accessory.
Details on the CTCSS and scrambler kit installation and configuration.
Information on the T2000-A70 data modem for data applications.
Details on the single port UART kit for computer control.
Explains the link settings for configuring CTCSS tones and scrambler operation.
Describes the signals used on the 9-way D-range connector (SKT1) for UART communication.
Details PCB link settings and signal descriptions for the data modem.
Details the kit components and provides step-by-step fitting instructions.
