Need help?Do you have a question about the Tait T2020 Series II and is the answer not in the manual?
Product generates RF energy, suitable for 'Occupational Use Only'.
Table showing minimum safe distances from antenna based on gain.
Switch off radio at petrol stations, near explosives, and check vehicle regulations.
Explains the function of each key on the radio's keypad.
Details the LCD display window and its indicators like BUSY, TX, SCAN, WAIT.
Instructions for powering the radio on and off using the volume knob.
How to select channels or groups for operation using keypad or numeric entry.
How to receive calls and understand busy indicators.
How to use the Monitor key to override muting controls.
Steps to initiate a call using the PTT key and microphone.
How to make calls to specific individuals or groups using Selcall.
Step-by-step guide to making a Selcall call.
How to make calls to a group of users using wild card characters.
How to answer a Selcall call and interpret indicators.
How to use alphanumeric entry for memory locations and calls.
Steps to enter DTMF mode for dialing or control codes.
Methods for entering digits and transmitting DTMF tones.
How to initiate an emergency call using a switch or key.
Common issues and checks for power and indicators.
To Next Page
General
