Tait T2020 Series II User Manual

23
STAT
Ch
Fn
α
T2000 II
Call Queuing (Selcall Option Fitted)
Your T2020 II can be preprogrammed to queue incoming calls. This feature enables the storage of up
to 10 caller identities.
Call Queue Not Empty
Whenever there is an entry in the call queue, the Function menu is automatically active, with ‘CALL
QUE’ appearing in the display window as the current item. This means that the radio always reverts to
the Function menu after a period of no-user activity, as long as there is a call queue entry. In addition,
the FUNCTION indicator flashes whenever the Function menu is active.
Accessing the Call Queue
The Call queue can be accessed through the Function menu. This is the same mode that is used to alter
user options.
1. Press the Function (
Fn
) key. The item last viewed while in this mode appears in the display
window.
2. Scroll through the displayed items using the Up and Down (
/ ) keys, and select
‘CALL QUE’ using the Enter (
) key.
You are now in Call Queue Entry mode.
Note: Call Queue Entry mode can only be accessed if there are entries in the call queue.
In Call Queue Entry mode, the display window shows the current entry number, and the total
number of entries in the list. An example of the display would be ‘CL 01/02’, indicating that the
current entry is entry number one, with a total of two entries in the queue. Use the Up and Down
keys to scroll through the list of entries, and the Zero (
0
) key to delete an entry from the
queue.

Tait T2020 Series II Specifications

General

Brand	Tait
Model	T2020 Series II
Category	Radio
Language	English