22
STAT
Ch
Fn
α
T2000II
User Programmable Scan
Depending on how your T2020
II
is programmed, you may be able to change the channels that are
included in your scan group. Existing channels can be removed and new channels can be added, as
required.
Edit the user programmable scan group, as follows:
1. Press the Function (
Fn
) key.
2. Scroll through the items in the display window using the Up
and Down (
/ ) keys, until ‘PROG GRP’ is dis-
played.
3. Press the Enter (
) key. The name of the group is
displayed, and the top row of indicators is illuminated.
4. Press the Enter key a second time to start the editing the
group.
5. Press the Up and Down keys to scroll through all the available channels. The SCAN indicator
indicates those channels that are included in the user programmable scan group, and a flashing
SCAN indicator indicates the home channel.
6. To add or delete a channel from the scan group, select the required channel and then press the
Enter key.
Note:
A scan group must contain 2 to 16 channels.
The home channel is defined by selecting a channel and then holding the Enter key for longer than 1
second. The SCAN indicator then flashes.
Note:
You can only delete a normal channel from the scan group. If the home channel is to be deleted
from the scan group, you first have to define another channel as home channel and then delete
the original home channel.
7. Once the group editing is complete, press the Function key to return to the Function menu.
8. Press a mode key to switch to another mode, if desired. Alternatively, the inactivity timer returns
the radio to the normal operating mode if no operator activity has been detected for 10 seconds.
To Next Page
Loading...
Need help?
General
