M2000-00
T2000-A03/-A04/-A16 Remote Loom Kits
8.16.7
Copyright TEL 31/12/97
Fit the 2 captive M4 nuts into the slots in the remote back panel and mount the
remote back panel onto the control head front assembly (1).
Secure in place using the 4 remote back panel screws, and push the 4 ESD plugs
(7) over the screw heads (T2000-A16 only).
Refit the remoting connector cover, pushing the slot in the cover onto the remote
loom cable.
To Next Page
Loading...
