M850-00
T800 Ancillary Equipment
H7
Copyright TEL 31/09/98
Rack Frames
T800-22-0000
The T800-22-0000 is a standard 5U high rack frame complete with wiring loom which is
designed to accommodate one 25, 50 or 100W base station or repeater. It comes fully
assembled with the following items:
T800-15-0000 speaker panel with programming port
T800-40-0001 blank panel (x2)
T800-41-0002 double module guide
T800-44-0000 power supply guide
T800-45-0000 PA guide
T800-50-0000 standard rack frame backplane PCB.
Refer to the T800 Ancillary Equipment Service Manual for more information.
T800-22-0001
The T800-22-0001 is the same as the T800-22-0000, but is supplied packed flat in disas-
sembled form for ease of transport. The wiring loom and backplane PCB are, however,
supplied complete and ready for installation.
T800-22-0002
The T800-22-0002 is a standard 5U high rack frame without wiring loom which is
designed to accommodate one 25, 50 or 100W base station or repeater. It comes fully
assembled with the following items:
T800-15-0000 speaker panel with programming port
T800-40-0001 blank panel (x2)
T800-41-0002 double module guide
T800-44-0000 power supply guide
T800-45-0000 PA guide.
T800-22-0003
The T800-22-0003 is the same as the T800-22-0002, but is supplied packed flat in disas-
sembled form for ease of transport.
T800-22-0004
The T800-22-0004 is a standard 5U high rack frame without wiring loom, guides or front
panels which comes fully assembled.
To Next Page
Loading...
Need help?
General
