To Next Page

To Previous Page

M850-00

T800 Ancillary Equipment

Rack Frame Guides

T800-41-0001

The T800-41-0001 rack frame guide is designed to fit into a T800 Series II rack frame and

will accept one T800 Series II module (except for power supplies and power amplifiers

which must use their own guides). It is supplied disassembled and comprises a top and

bottom rail, a rear panel, two D-range sockets and mounting screws.

T800-41-0002

The T800-41-0002 rack frame guide is designed to fit into a T800 Series II rack frame and

will accept two T800 Series II modules (except for power supplies and power amplifiers

which must use their own guides). It is supplied disassembled and comprises two top

and bottom rails, a double width rear panel, four D-range sockets and mounting screws.

T800-41-0003

The T800-41-0003 rack frame guide is designed to fit into a T800 Series II rack frame and

will accept three T800 Series II modules (except for power supplies and power amplifi-

ers which must use their own guides). It is supplied disassembled and comprises three

top and bottom rails, a triple width rear panel, six D-range sockets and mounting

screws.

T800-41-0004

The T800-41-0004 rack frame guide is designed to fit into a T800 Series II rack frame and

will accept four T800 Series II modules (except for power supplies and power amplifiers

which must use their own guides). It is supplied disassembled and comprises four top

and bottom rails, a four-module wide rear panel, eight D-range sockets and mounting

screws.

T800-42-0000

The T800-42-0000 rack frame guide will allow a duplexer to be mounted in a T800 Series

II rack frame. It occupies a single module space and comprises a folded metal chassis,

mounting brackets and screws.

Tait T855 User Manual

Questions and Answers: