52 Troubleshooting
Reinstalling the microphone
Notice The microphone grommet must be installed when-
ever the microphone is plugged into the microphone socket.
1 Plug the microphone into the microphone socket.
2 Slide the microphone grommet along the microphone
cord and push two adjacent corners of the grommet into
the microphone socket cavity.
3 Squeeze the grommet and push the remaining corners
into position.
4 Check that the grommet is seated correctly in the cavity.
Removing the radio from the vehicle
1 Switch off the radio.
2 Unscrew the four thumb screws that secure the radio
to the U-bracket .
3 Carefully lift the radio clear of the U-bracket.
4 Disconnect the antenna and power cable from
the rear of the radio.
microphone
grommet
control head
a
c
d
a
b
a
b
c
d
To Next Page
Loading...
