64 Operating in P25 trunking mode
To remove a channel from a talkgroup scan group:
1 Wait until the radio has stopped on the talkgroup
that you want to remove from the talkgroup scan
group.
2 Press the function key programmed for
nuisance
delete.
If the talkgroup has been removed successfully, the
message
Channel nuisance deleted appears in the
display.
The talkgroup remains removed from the talkgroup
scan group until you either select another talkgroup
scan group or the radio is turned off and then on
again.
Note: The function key programmed to activate
talkgroup scanning may be programmed so that a short
key press activates scanning and a long key press
activates nuisance
delete.
Editing a talkgroup scan group
You can use the Edit Group menu to view group
membership details and make permanent changes to
your radio’s talkgroup scan groups, if your radio is
programmed in this way.
Select and edit a talkgroup scan group in the same way
as a conventional scan group. See
“Editing a scan
group” on page 52.
Note: When operating on a P25 trunked system, each
channel on a conventional system represents a
talkgroup.
Channel
nuisance
deleted
To Next Page
Loading...
Need help?
General
