Need help?Do you have a question about the Tait TM9100 and is the answer not in the manual?
Describes the manual's coverage of level-1 and level-2 repairs for TM9100 radios and accessories.
Details the hardware and software versions of the TM9100 series, including internal part numbers for boards.
Explains the types of alerts used in the manual and lists common abbreviations.
Overview of the TM9100 series, its capabilities, and applications.
Details the technical specifications for TM9100 radios, including frequency ranges, power, and physical characteristics.
Describes the mechanical design of the radio, including control head and radio body components.
Details the specifications and pinouts of connectors for the radio body and control head.
Describes the hardware and software modules of the radio and their interaction.
Explains the functioning of the transceiver in receive mode.
Describes the functioning of the transceiver in transmit mode.
Covers repair levels, website access, tools, equipment, spares, and test equipment setup.
Lists the required tools, equipment, and spares for servicing TM9100 radios.
Details precautions for servicing radios, including mechanical, compliance, anti-static, and transmitter issues.
Covers setting up test equipment, basic programming, calibration, and invoking CCTM.
Explains how to place the radio in CCTM and lists available commands for fault diagnosis.
Guides on diagnosing faults in the power supply circuitry of the radio.
Covers diagnosis of faults involving signals at internal and connector interfaces.
Diagnoses faults in the frequency synthesizer, including RF PLL and FCL circuitry.
Covers diagnosis of faults in the receiver circuitry, including sensitivity, RSSI, and distortion.
Diagnoses faults in the transmitter circuitry for 50W/40W TM9100 radios.
Diagnoses faults in the transmitter circuitry for 25W TM9100 radios.
Covers diagnosis of faults in the CODEC and audio circuitry.
Guides fault finding for the control head, covering power supply, display, keys, and speaker issues.
Details operation, installation, radio programming, interface specification, and circuit description.
Covers installation, removal, and ordering of extra parts for the security bracket.
Explains the installation and radio programming for the ignition sense kit.
Details operation, installation, adjustment, interface specification, and circuit description.
Provides information on handset installation, radio programming, and interface specification.
Covers installation and power connector wiring for high-power remote speakers.
Details installation, radio programming, and interface specification for the remote PTT kit.
Provides instructions for installing an enhanced remote control-head kit.
Explains the operation and test setup for the TOPA-SV-024 test unit.
To Next Page
General
