TM9100 Mobiles: 110 W Mobile Installation Guide Installing the Radio 21
© Tait Electronics Limited October 2005
To mount the radio using the base plate and cover:
1. Fix the base plate securely to the mounting surface.
2. Connect the Control Head cable, Antenna cable and External
Speaker (if installed), to the 110W Mobile. Lastly, connect the power
cable.
3. Place the 110W Mobile onto the base plate.
4. Fit the cover over the 110W Mobile and then slide it forward 5mm
(1/4") to engage with the base plate.
5. Using the key supplied, turn the lock to lock the cover in place.
To Next Page
Loading...
