Operating in conventional mode 53
(Depending on how your radio is programmed, you
may be able to use a function key, the scroll keys
or left selection key to select a group.)
2 In the Channels menu, scroll through the list of
channels and groups until the group you want
appears.
3 Press Select, and the programmed scan or voting
group is now shown on the display. The orange
LED glows and the scanning icon appears on
the display.
Dialing a scan or voting group
This feature is only available for radios with
alphanumeric keys.
Dialing a scan or voting group may be available from
the radio’s idle display but is always available while in
the Channels menu.
To dial the group number from the default display:
1 Dial the number associated with the scan or voting
group using the alphanumeric keys.
2 Press Select, and the programmed scan or voting
group is now shown on the display. The orange
LED glows and the scanning icon appears on
the display.
SelectBack
Channels
Channel 9
Scan 1
To Next Page
Loading...
Need help?
General
