52 Operating in conventional mode
1 Dial the number associated with the channel using
the alphanumeric keys.
2 Press Select, and the programmed channel is now
shown on the display.
Automatic channel selection
Your radio may be configured to change channels
automatically based on your location.
Selecting a channel manually as described above will
end automatic mode, and the manual mode icon
will appear on the display.
Your radio may be configured to use a timer or a
function key to return to automatic mode.
Selecting a scan or voting group
A scan or voting group is a collection of channels that
are grouped together for either scanning or voting. In
the Channels menu, the scan or voting group is
shown as being a single channel item, e.g. “Scan1”.
The sections "Using the radio in different repeater
areas" on page 82 and "Scanning a group of
channels" on page 83 explain how your radio
operates once a scan or voting group has been
selected.
Using the Main menu
1 Press Menu and select Channels.
SelectBack
Main menu
Channels
Zones
To Next Page
Loading...
