For your safety 17
To meet the requirements of Directive 72/245/EEC and its
amendments, installation of this product in a vehicle must
be performed according to the instructions provided by
the vehicle manufacturer.
Notice
Failure to install the product correctly may void
the vehicle’s type-approval. The owner could be held
responsible for any damage resulting from vehicle failure
that can be attributed to RF energy interfering with the
vehicle systems.
Unapproved modifications or changes
to radio
The radio is designed to satisfy the applicable compliance
regulations. Do not make modifications or changes to the
radio that are not expressly approved by Tait. Failure to
do so could invalidate compliance requirements and void
the user’s authority to operate the radio.
High radio surface temperatures
Caution
The bottom surface of the radio and the
heatsink fins can become hot during prolonged operation.
Do not touch these parts of the radio.
EN 62368 requirements (25 watt mobiles)
This radio complies with the European Union standard
EN 62368 when operated up to the rated 33% duty cycle
of two minutes transmit and four minutes receive, and with
ambient temperatures of 30 °C or lower.
Caution
Operation outside these limits may cause the
external temperature of the radio to rise higher than this
standard permits.
To Next Page
Loading...
Need help?
General
