Embroidery starts
67
Chapter 4
1
2
3
4
5
6
7
8
9
10
11
7-2. To return frame/To advance frame (Frame Back/Frame Forward)
[To return frame]
This function will return the frame to the direction of stitches returning in the state that the needle bar is
stopped. The frame will be returned when thread breaks, and the repair stitches will be performed from
that position.
[To advance frame]
This function will advance the frame to the direction of stitches proceeding in the state that the needle
bar is stopped. The frame can be moved immediately to the embroidery start point when you want to
start from the middle of embroidery.
7-2-1. To return frame by using stop switch
Perform setting of Frame Back. (p.156)
The setting of the machine will become Frame Back automatically at thread breakage.
When performing this operation, do not put your hands, etc. on the table. Moving the
frame could injure you.
Current frame position
Return the frame.
Advance the frame.
(1) You want to return the frame for 1 stitch.
During stop, press the stop switch one time.
Current frame position
Embroidery direction →
The frame will return.
UO04
To Next Page
Loading...
