Tamarack Technologies HV1600 - User Manual

1
HV1600 Wi-Fi Hub Instruction Manual.
PERFORM THESE TASKS AFTER THE FAN HAS BEEN INSTALLED AND, HAS POWER.
Devices that must be present to control the Wi-Fi Hub.
 An active 2.4 GHz wireless home network is required to control the HV1600 Hub with several
smart devices and, maintain internet access to the smart devices (recommended).
Without a wireless home network present the HV1600 Hub can be controlled directly
with the Tamarack app with a single (1) smart device at one time. To control the fan with one
smart device without a wireless home network complete only step one “Out of box” of the
instructions.
During the setup process “Out of the box” only one smart device can be used to setup
the Hub and configure it to the wireless home network.
Use the Tamarack app to provide the wireless network information to the HV1600
Hub. Adding the HV1600 Hub to your wireless home network will allow for several smart
devices to control the fan at the same time with the Tamarack app.
Compatible Smart Devices.
 Phones: iOS and Android. An active phone account is not required to interact with the Hub over
Wi-Fi home network with the Tamarack app. The phone will need to have access to the Apple
Store or a Google Play account to download and use the Tamarack app.
 Tablets: iOS and any Android device that has access to the Apple Store or a Google Play account
to download and use the Tamarack app.
Tamarack app Tamarack app
On iTunes Store. On Google play

Tamarack Technologies HV1600 Specifications

General

Brand	Tamarack Technologies
Model	HV1600
Category	Network Router
Language	English

Summary

Wi-Fi Hub Setup Prerequisites

Required Devices for Control

Ensures a 2.4 GHz wireless home network is active and internet access is maintained for smart device control.

Compatible Smart Devices

Lists supported phones (iOS/Android) and tablets that require access to app stores for the Tamarack app.

Out of the Box Hub Setup

Connect to Hub Wi-Fi

Connect your smart device to the HV1600 Hub's Wi-Fi hotspot using the default password 'myfan'.

Launch Tamarack App

Open the Tamarack app after connecting to the Hub to select and begin the fan setup process.

Fan Operation Without Home Network

Test Fan Operation

Operate and test the HV1600 Hub directly via the app, adjusting the timer and fan speed.

Connect HV1600 Hub to Wireless Home Network

Disable Ad Blockers

Temporarily disable ad blockers on your smart device to prevent pairing issues with the home network.

Confirm Device Connection

Ensure your smart device is connected to the Hub, not the home network, before adding it.

Configure Network Settings

Access device settings to change Wi-Fi mode and input your home network's SSID and password.

Set Network Security

Change the security setting from WEP to WPA for enhanced network protection.

FAQ and Troubleshooting

Operate HV1600 Hub

Guide on how to operate the hub via the app, including setting fan speed and timer.

Turn Fan ON;OFF

Instructions for turning the fan on and off using the app's device management or timer.

Change Default Password

Procedure to change the default network password for the Hub via Network Settings.

Remote Fan Control

Clarifies that control is limited to the wireless local area network, not via the internet.

Hub Maintenance and Reset

Check Software Updates

Steps to check for and initiate firmware updates for the HV1600 Hub via the app.

Perform Factory Reset

Details two methods for resetting the Hub to default factory settings, losing all added information.