Need help?Do you have a question about the TANDBERG Huldra 10 and is the answer not in the manual?
General| Power output | 30 watts per channel into 8Ω (stereo) |
|---|---|
| Input sensitivity | 2.2mV (MM), 160mV (line) |
| Speaker load impedance | 4Ω to 16Ω |
| Dimensions | 430 x 105 x 300mm |
| Tuning range | FM: 87.5 - 108 MHz |
| Signal-to-Noise Ratio | 62dB (MM), 78dB (line) |
Instructions for adjusting the audio frequency section, including quiescent current and clipping.
Procedures for aligning the FM tuner section.
Procedures for aligning the AM tuner section.
Guidance for diagnosing and resolving FM reception issues.
Guidance for diagnosing and resolving AM reception issues.
Procedures for adjusting the stereo decoder unit.
Cleaning and lubricating switch contacts for reliable operation.
Applying lubricant to the lid bearing surface for smooth movement.
Lists mechanical components and their ordering information.
Lists electrical components and their ordering information.
To Next Page
