Tangent Dab2go junior - Dual Alarm Setting and Alarm Snooze; Alarm Setting

6
Dynamic Label Segment: Displays scrolling text information supplied by the
broadcaster.
FM Radio
Press the Info/Menu button repeatedly to show the different program
information.
Program Type: Displays a description of the type of program provided by the
broadcaster..
Signal Strength: Displays a signal bar with the strength of the current station..
Time and Date: Displays the time and the date.
Frequency: Displays the station’s transmission frequency .
Audio Type: Displays the audio type of the station you are listening to. It will
either be Stereo or Mono.
Radio Text: Displays scrolling test information supplied by the broadcaster.
Menu Setting
With the radio turned on, press and hold the Info/Menu button. This will open
the “Set Menu”.
Turn the Tune/Enter button to select your desired Sub-option between:
Time/Date:
Press the Tune/Enter button, the hour digitals will flash. Turn the Tune/Enter
button to set the hour correctly, then press the Tune/Enter button to confirm.
Repeat the last two steps to set the minutes, the year, Month, Date.
System Version:
Press the Tune/Enter button, then you can check the software version number.
Factory reset:
Press the Tune/Enter button and the display will show ”Factory reset ? <No>
Yes ”. Turn the Tune/Enter button to select “Yes”.
Press the Tune/Enter button again and will reset the radio.
Dual Alarm Setting and Alarm Snooze
Alarm Setting
Press the Alarm button to use Alarm 1 and press again to use Alarm2.