4
FM Radio
Press the Mode button multiple times to switch between DAB/FM/BT.
The first time you do this, the FM frequency “87.5 MHz” will be displayed on the
screen. Remember to extend the antenna.
To auto scan, press and release the Scan button. This will start scanning up
the frequency band and play the first station finds with good signal.
To scan down the frequency band, press and hold the Scan button for a few
seconds. The radio will display station information when you press the
Info/Menu button. Press multiple times to view all information available.
FM Scan setting
Choose between scanning strong and week signals (All) or only the strong
stations (Only). Press and hold the Info/Menu button. To make your choice,
twist the Tune/Enter button to highlight your option.
The radio will automatically save all the stations with a strong signal. After
searching has finished it will automatically play the first station Stored. Select
“FM Scan Setting” and press Tune/Enter button down. Turn the Tune/Enter
button to choose between “All” or “Only”. Press the Tune/Enter button down to
confirm your choice.
Manual scan
To listen to a specific frequency, turn the Tune/Enter button to search forward
and back.
Mono and Stereo
In working mode, press the Tune/Enter button to switch between “Set to Mono”
or “Set to Stereo”.
Bluetooth Mode
Press the Mode button to select Bluetooth Mode and then the display will show
“Bluetooth Pairing”.
Turn on your device Bluetooth on and search the pairing name“Dab2go Junior”
then press it to pair. After the pairing successfully, the display will show
“Bluetooth Paired Play/ Pause”.
To Next Page
Loading...
Need help?
General
