10
OPERATION AND FUNCTIONS
ON, OFF and standby
1. Turn on the unit by pressing the Standby/ON button on the front panel or the CDP button on the remote control.
2. If you wish to turn off the unit to avoid any power consumption, you must remove the power cord.
Load a disc
To load a disc press the eject button on the remote control or on the front panel. When the disc has been read, the display will
show the number of tracks on the disc and the total playback time.
If there is no disc in the tray, the message ”NO DISC” will be displayed. If the unit has trouble reading a disc, the message ”NO
DISC” will be displayed.
Play/Pause
Press the PLAY/PAUSE button on the remote control once to start playback. Press it again to pause. Or press the right hand side
knob to play or pause playback.
Stop
To stop playback, press the STOP button on the remote control or press the left hand side knob on the front panel. The display
will again display the number of tracks on the disc and the total playback time.
Previous and Next
Previous and next is controlled by the right hand side knob. On the remote you press for next and for previous track.
Forward and Rewind
Fast Forward and Rewind is controlled by the left hand side knob. To resume normal playback press play. On the remote press
and hold for forward and for backwards.
Memory
The unit can be programmed to play the tracks of a CD in a certain order. Please look in the section: REMOTE CONTROL
INFORMATION on how to program it.
Menu Layout
The menu is accessed by pressing and holding the left hand side knob, or by pressing AMP and then MENU on the remote.
Use the arrow keys and ENTER key of the remote or the left hand side knob on the front panel to select.
Random
It is possible to have the unit playback the tracks in random order.
Repeat
The unit can be set to repeat one or all tracks of a CD.
NOTE: This function can also be used, when unit has been programmed.
Display - Brightness
Levels of 25-50-75 and 100% can be selected. 75% is default. The DIM button on the remote toggles the levels.
Display – Time Out
Time limits of 5 and 20secs can be selected and of course off. Time Out means the display is switched off.
To Next Page
Loading...
Need help?
General
