7
REMOTE CONTROL INFORMATION
1
2
3
4
5
6
7
9
8
11
10
12
13
14
15
16
18
19
20
21
22
23
24
25
26
27
17
1. System Off
Press this key to turn off the EXEO AMP and any other EXEO
product.
2.
Open and close the disc tray on the EXEO CDP.
3. Autotune
Does not apply.
4. Info
Press CDP and the MENU button to display the current
playing time, remaining time of the track or the total remaining
of the disc.
5. ST/Mono
Does not apply.
6. Memory
Under stop mode, press memory and “MEM01 = 01” appears
on the display, use the numerical keys to select your tracks,
e.g. press 2, then “MEM01 = 02” appears on the display,
press enter to select. Nextly “MEM02” will be displayed and
same procedure applies. Press key to start to play
your custom list according to your programming.
7. Number Keys
Select numbers by pressing these buttons.
8. DIM
Press this button to toggle the brightness between: 25%, 50%,
75% & 100%.
9. MODE
Does not apply.
10. Menu
Press the CDP button and then press the Menu button to
enter the menu.
11. Cursor keys◄►▲▼
12. Enter
To confirm selection.
13. Tuning +/-
Does not apply.
14. Volume+/-
Does not apply.
15. Mute
Does not apply.
16. Play/Pause
17. Stop
18. Press to select the previous track. Press and hold to
fast rewind and return to normal playback after release.
19. Press to select the next track or chapter (MP3).
Press and hold to fast forward and return to normal playback
after release.
20. CDP
Press this button to activate the EXEO CDP from Standby or
to select MENU or INFO.
21. NET
Does not apply.
22. DAB
Does not apply.
23. AUX1
Does not apply.
24. AUX2
Does not apply.
25. Phono
Does not apply.
26. AMP
Does not apply.
27. Speaker A/B
Does not apply.
To Next Page
Loading...
Need help?
General
