8 (GB)
DAB Mode
Carefully remove your radio from the box. You may wish to store the packaging
for future use.
Inside the box you will find:
Main Unit
Power Adapter
User Guide
Switching ON/OFF
1. Connect the power adapter between your radio and the mains socket, your
radio will be in standby mode.
2. Unwind the aerial, and then press /VOLUME knob to switch unit on.
Press /VOLUME knob again to switch it to standby mode.
3. For initial use, the unit will automatically enter DAB mode and carry out a full
scan. During scan the display will show a slide bar that indicates the progress
of the scan and the amount of stations that have been found so far.
4. Once the scanning is finished, the DAB stations will be displayed in
alphanumeric order and the first station in the list will be broadcasted.
Selecting another station
1. Turn TUNE/SELECT knob to browse station list and then press TUNE/SELECT
knob to confirm your selection.
2. Or, you can press MENU button to find 'Station list', then turn TUNE/SELECT
knob to browse and press to confirm.
To Next Page
Loading...
Need help?
General
