Tannoy CMS501 User Manual

14
15
8.2 CMS 601 MODEL DIMENSIONS:
CMS 601 models TEMPLATE HOLE CUTOUT SIZE: 253mm
9. TECHNICAL SPECIFICATIONS:
CD106 SMC106SMCCD105 SMC105SMCLEDOM
Inductive Tweeter cirtnecnoC lauDreteewT evitcudnIcirtnecnoC lauDserutaeF
Symmetrical
Constant Directivity
Symmetrical
Constant Directivity
Symmetrical
Constant Directivity
Symmetrical
Constant Directivity
50 WPower Rating
(Watts, RMS)
60 W 60 W 80 W
CMS
100 WPower Rating
(Watts, Peak)
120 W 120 W 160 W
89 dBSensitivity (dB)
1W @ 1m **
89 dB 91 dB 90 dB
89 Hz -22 KHzFrequency Response*
of Blind-Mount (BM) models ((3dB)
88 Hz -54 KHz 75 Hz -20 KHz 63 Hz – 20 KHz
C Ring, tile bridge,
paint mask,
hole template, grille
,egdirb elit ,gniR Cseirossecca dedulcnI
paint mask,
hole template, grille
C Ring, tile bridge,
paint mask,
hole template, grille
C Ring, tile bridge,
paint mask,
hole template, grille
Plaster (mud) ring gnir )dum( retsalPgnir )dum( retsalPgnir )dum( retsalPseirossecca lanoitpO
Security toggle clamp pmalc elggot ytiruceSpmalc elggot ytiruceSpmalc elggot ytiruceS:ngised gnipmalC
70V/ 100V /
Low Impedance (6 Ohms)
Line voltage: 70V/ 100V /
Low Impedance (8 Ohms)
70V/ 100V /
Low Impedance (6 Ohms)
70V/ 100V /
Low Impedance (8 Ohms)
30 W/ 15 W/ 7.5 W
3.75 W (70V-line only)
LoZ
(6 Ohms)
OFF
W 5.7 /W 51 /W 03detnuom tnorf ,hctiws yrator aiv sgnippaT
3.75 W (70V-line only)
LoZ
(8 Ohms)
OFF
60 W/ 30 W/ 15 W
7.5 W (70V-line only)
LoZ
(6 Ohms)
OFF
60 W/ 30 W/ 15 W
7.5 W (70V-line only)
LoZ
(8 Ohms)
OFF
OFF position
disconnects from line
noitisop FFO:hctiwS
disconnects from line
OFF position
disconnects from line
OFF position
disconnects from line
Complete with
Fixed back can
htiw etelpmoC)MB( tnuoM dnilB :noitpO
Fixed back can
Complete with
Fixed back can
Complete with
Fixed back can
Separate PI back can nac kcab IP etarapeSnac kcab IP etarapeSnac kcab IP etarapeS)IP( llatsnI erP :noitpO
Cable clamp
plus up to 22mm
squeeze connector
pmalc elbaCsnoitpo elbaC
plus up to 22mm
squeeze connector
Cable clamp
plus up to 22mm
squeeze connector
Cable clamp
plus up to 22mm
squeeze connector
3 sets of horizontal
positions, 19/22/28mm
diameters.
latnoziroh fo stes 3snoitcennoc tuo-kconk tiudnoC
positions, 19/22/28mm
diameters.
3 sets of horizontal
positions, 19/22/28mm
diameters.
3 sets of horizontal
positions, 19/22/28mm
diameters.
Loop through with
screw terminals
htiw hguorht pooLrotcennoC
screw terminals
Loop through with
screw terminals
Loop through with
screw terminals
IN: 1+ve 2-ve
OUT: 3-ve 4+ve
ev-2 ev+1 :NItuo-nip yaw 4 rotcennoC
OUT: 3-ve 4+ve
IN: 1+ve 2-ve
OUT: 3-ve 4+ve
IN: 1+ve 2-ve
OUT: 3-ve 4+ve
190mm (7.5") BM & PI IP & MB )"0.01( mm352IP & MB )"0.01( mm352IP & MB )"5.7( mm091MB retemaid eloh gnilieC
190mm (7.5") BM & PI IP & MB )"0.01( mm352IP & MB )"0.01( mm352IP & MB )"5.7( mm091IP retemaid eloh gnilieC
210mm (8.2") )"0.11( mm082)"0.11( mm082)"2.8( mm012retemaiD lezeB
207mm (8.2")Max height:
front of tile surface to safety lug. BM
207mm (8.2") 276mm (10.9") 276mm (10.9")
154mm (6.1")Max height:
back of tile surface to safety lug PI can
154mm (6.1") 169mm (6.7") 169mm (6.7")
UL-1480, UL-2043, CE UL-1480, UL-2043, CEUL-1480, UL-2043, CEUL-1480, UL-2043, CE slavorppA
73 HzLow frequency limit* of
BM models (-10dB)
65 Hz 50 Hz 43 Hz
85 Hz -22 KHzFrequency Response*
of Pre-Install (PI) models ((3dB)
85 Hz -54 KHz 75 Hz -20 KHz 65 Hz – 20 KHz
63 HzLow frequency limit* of
PI models (-10dB)
63 Hz 50 Hz 50 Hz
* Measured in ceiling (2 half space)
** 1W @ 1m, 2.83V for 8
, 2.4V for 6
CMS 601 PI BACK-CAN:
319.0
[12.56"]
249.4 [9.82"]
168.5
[6.63"]
151.2
[5.95"]
8.8
[0.35"]
351.0 [13.82"]
CMS 601 PI:
5.0
[0.20"]
95.5
[3.76"]
244.3 [9.62"]
280.0 [11.02"]
CMS 601 BM & CMS 601 DC BM:
258.0
[10.16"]
275.3
[10.84"]
5.0
[0.20"]
244.3 [9.62"]
280.0 [11.02"]
CMS 601DC PI
280.0 [11.02’]
244.3 [9.62”]
99.4
[3.91"]
5.0
[0.20"]

Tannoy CMS501 Specifications

General

Brand	Tannoy
Model	CMS501
Category	Speaker System
Language	English