The following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd of
Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the
protection requirements of the European Electromagnetic Compatibility Standards
and Directives relevant to Domestic Electrical Equipment. The apparatus is designed
and constructed such that electromagnetic disturbances generated do not exceed
levels allowing radio and telecommunications equipment and other apparatus to
operate as intended, and, the apparatus has an adequate level of intrinsic immunity
to electromagnetic disturbance to enable operation as specified and intended.
Details of the Apparatus: Tannoy Contractor Loudspeaker
Model Number: V8
Associated Technical File: EMCV8
Applicable Standards: EN 50081-1 Emission
EN 50082-1 Immunity
Electrical Safety: EN 60065
Signed:
Position: Engineering Director – Professional Products
Tannoy Professional
Date: 10/06/2002
For Tannoy Ltd
16. Declaration of Conformity
CONTENTS
1. Introduction
2. Unpacking
3. Connectors/Cabling
4. Polarity Checking
5. Amplification & Power Handling
6. Crossovers
7. Equalisation
8. Arraying
9. Dimensions
10. Performance Data
11. Technical Specifications
12. Rigging & Suspension
12.1 General Safety Advice
12.2 Secur – ET V8Y Yoke bracket
12.3 Secur – ET VCB2 & VCB4
12.4 Secur – ET VEB Eyebolts
12.5 Secur – ET VTH Pole mount
12.6 Secur – ET VCS Ceiling Saddle
12.7 Secur – ET VPC Pole Clamp
12.8 Secur – ET V8B Wall Mounting Bracket
13. System Configuration & OEM Controllers
14. V8 Recommended Service Parts & Accessories
15. Warranty
16. Declaration of Conformity
Enfocus Software - Customer Support
To Next Page
Loading...
Need help?
General
