TaoTronics TT-AH002 User Manual

Important
- Please leave the humidier in the room for at least half an hour before use, especially
when the outdoor temperature is below 5℃/41°F;
- Do not turn on the unit when no water is in the tank, it will cause serious damage;
- Do not touch the water in the sink or any component of the sink while the unit is working.
Add Water
- Remove the water tank from the base;
- Twist to loosen the switch of the lter on the bottom of the water tank and ll water in
the tank; then twist the lter back on;
- Put the tank back on the base;
Note: Do not ll the water tank via the nozzle.
How to Use
- Turn the switch clockwise pass the “ON” position. A tick sound indicates the humidier
has been turned on. The LED indicator will be green to show it has started working;
- Keep turning the switch clockwise to increase evaporation level. Maximum
evaporation is 300mL/h;
- Turn the switch counterclockwise to the “OFF” position to turn off the humidier. The LED
indicator will be off to show it has stopped working.
Low Water Protection
When the water level drops below a minimum amount, the LED indicator will become
red. When water is depleted, the humidier will automatically power off.
Clean the Water Tank
1. Make sure the unit is turned off;
2. Remove the water tank from the base;
3. Rinse the tank with clean water and wipe off any water on the outside of the tank
before putting it back.
Product Diagram
① Nozzle
② Water tank
③ Water intake
④ Filter
⑤ Handle
⑥ Water sink
⑦ Power cable
⑧ Transducer
⑨ Base
⑩ Floater
Fixer for oater
LED Indication
Switch
Cleaning the Base / Transducer / Filter
- Please be careful when cleaning the unit. Any water splashing inside the base may
damage the unit;
- Make sure the unit is turned off;
- Empty the water from the base;
- Use a towel to wipe clean the base. Do not use organic solvent like alcohol or
acetone to clean the base;
- To clean the transducer, pour some white vinegar on the transducer;
- Fill a small amount of warm water and wait for 3 to 5 minutes;
- Clean the transducer by using the included brush;
- Rinse clean the transducer;
- To clean the lter, simply dip the lter in white vinegar for 10 minutes and rinse clean
with water.
Caution
- Please do not dismantle the product by yourself, always ask professional electrician or
authorized technician for repairing;
- If you smell bad odor or anything unusual, please turn off the unit immediately;
- Please do not remove the power plug with wet hands as it may cause electrical shock;
- It is not a toy. Keep away from children;
- Do not place this unit on sloping or uneven surface to avoid water leaking or
component damage;
- Do not put this unit near any heat source or under direct sunlight;
- Keep away from other electric appliances that are prone to humidity damage;
- Using the unit in a space larger than 150m
3
will reduce its effectiveness;
- Regularly clean the unit if it won’t be used for a long period; store in a
dry and shady place.
03/04

TaoTronics TT-AH002 Specifications

General

Brand	TaoTronics
Model	TT-AH002
Category	Humidifier
Language	English