Note:
• Please note the “L” and “R” markings on the headphone, they correspond to left side
and right side respectively.
• In addition to the headphone, two pairs of different size ear buds are included in the
package. Please try them out and nd the most comfortable t for you.
Trouble shooting
Q: My headphone will not switch on.
A: Please recharge it and make sure it has enough power. Plug the unit to a charger
and see if the power button becomes solid red.
Q: Why can’t I pair this headphone with other Bluetooth devices?
A: Please check the following points:
• Make sure your Bluetooth device supports A2DP prole
• Make sure the headphone and your device are next to each other or within 3 feet
• You must get the headphone into pairing mode with the indicator ashing
green and red alternately
• Try to reboot your Bluetooth device
Q: After connecting and pairing with my Bluetooth device, I cannot hear any music
from the headphone.
A: Please check the following:
• Your sound system is connected to the headphone (If the LED indicator ashes
green once every 10 seconds then they are connected)
• Make sure the music volume is at audible level on both your
Bluetooth device and headphone
• Make sure your Bluetooth device is playing music
How to Use
1. Charging
1) Connect the charging port with any USB charging adapter or
active computer USB port
2) Charging will start automatically with LED indicator turning red
3) The headphone is fully charged when LED indicator turns green
2. Pairing
1) Make sure the headphone and your Bluetooth device are next to each other (within 3 feet)
2) Press and hold the Multifunction button for 5 seconds to bring the headphone into
pairing mode with the LED indicator ashing green and red alternately
3) Activate Bluetooth function on your phone and search for the nearby Bluetooth
connection:
• For iPhone: Settings > Bluetooth > On
• For Android: Settings > Wireless & Networks > Bluetooth: On > Scan for devices
4) Find “TaoTronics TT-BH09” in the search results. Tap on the name to connect. Once
connected, only the green LED will ash once every 10 seconds
Note:
• If a PIN code is required for pairing, please try “0000” or “8888” (4 zero or 4 eight)
• The Bluetooth headphone can remember previous paired devices. If you have
previously paired the headphone with a device, simply turn on your device and the
headphone (by pressing the Multifunction button for 3 seconds to turn on), they will
connect the last connected device automatically without going into pairing mode.
3. Pairing with two devices at the same time
Although you can pair with two devices, only one of them can play music or make
phone call with the headphone at any time. To pair with two devices:
1) Follow previous instructions in the “Pairing” section to pair the
TT-BH09 with your rst device
2) Turn off the Bluetooth function of your rst device, follow the “Pairing” instructions again
to pair and connect to your second device
3) With Bluetooth function on both devices turned on, simply restart the headphone, it
will connect to the last connected device automatically, while the other
device needs to connect manually
4) To switch between the two paired devices, simply pause the music on the rst device
and play music on the second device or vice versa
4. How to Wear
Please wear the headphone as shown in the diagram:
Care and Maintenance
• Charge the headphone at least once every 6 months
• Keep the headphone away from heat and humidity
• Do not put the product under direct sunlight or hot areas. High temperatures will
shorten the lifespan of the headphone and its battery
• Do not try to take the product apart
• Do not drop or knock your headphone on hard surfaces
• Do not use chemicals or detergents to clean the product
• Do not scrape the surface with sharp objects
Customer Support
For customer support and technical assistance, please email to:
support@taotronics.com (United States)
support.uk@taotronics.com (United Kingdom)
support.ca@taotronics.com (Canada)
For more information, please visit www.taotronics.com.
Warranty
TaoTronics headphones are covered by TaoTronics parts and labor warranty for 12
months from date of their original purchases. If the device becomes defective, please
contact TaoTronics Support to launch warranty claim. We will instruct you on how to
return the defective unit back to us for repair and replacement.
The following are excluded from TaoTronics warranty cover:
• Device purchased as 2nd hand, used or from unauthorized sellers
• Damage resulted from misuse and abusive action
• Damage resulted from chemical, re, radioactive substance, poison, liquid
• Damage resulted from natural disaster
• Damage caused to any 3rd party / person / object and beyond
No return will be accepted without seller authorization.
Statement
We can only provide after sale services for products that are sold by TaoTronics or
TaoTronics authorized retailer and distributor. If you have purchased your unit from a
different place, please contact the seller for return and warranty issues.
07/08
To Next Page
Loading...
Need help?
General
