07 08
Note:
For optimal efficiency, the dehumidifier
shall be operated in an enclosed area.
Keep all doors, windows and other out-
side entrances to the room closed.
Place the dehumidifier in an area where
the temperature will not drop below 41°F
(5°C). This dehumidifier is designed to
operate with a working environment be-
tween 41°F (5°C) and 90°F (32°C).
Do not force casters to move over car-
pet, or move the dehumidifier with water
in the bucket. (The dehumidifier may tip
over and spill water.)
Once the power cord buckle has been in-
stalled, it cannot be removed. The power
cord buckle is used only when storing the
unit.
3 Take out the power cord buckle from the
water bucket of the dehumidifier, then in-
stall by pressing it into the rear cover.
4 Plug into an appropriate voltage AC out-
let. Then the dehumidifier is ready for use.
Operations and Functions
Power Button
Press to turn the dehumidifier ON or OFF.
LED Display
Shows the current (±5% accuracy) room %hu-
midity level in a range of 30% to 90% RH (Rela-
tive Humidity).
Shows the set %humidity level (35% ~ 85%
RH) or Auto Start/ Stop time (0 ~ 24) while set-
ting.
Malfunc-
tion Code
Meaning
AS Humidity sensor error
ES Temperature sensor error
P2
Water bucket full or not
secured properly in place.
Empty the water bucket and
place it in the right position.
To Next Page
Loading...
Need help?
General