12
3.1.4 Interface Button Functions
Temporary audio / video manual recording -
recording icon will be shown (the recorded clip
will be stored on the micro SD memory card)
Capture screen image – selectable image resolution
(1280*720, 640*360, 320*180, 160*90)
Mute phone and IP Cam microphone
Activate phone and IP Cam microphone
Mute phone and IP Cam audio
Activate phone and IP Cam audio
Adjust Brightness / Contrast / Saturation / Sharpness /
Mode / Resolution parameters
NOTE:
The Video Record Button applies only to temporary manual recording.
Exit the monitor screen or tap the button again to stop the recording
and the footage will be saved onto the micro SD card.
To Next Page
Loading...
Need help?
General