A yellow light means the camera is online, but a
camera software upgrade is pending or your
password has been changed. You need to enter
the new password to access the camera again.
Note:
1) If the camera is shown as offline, try the following:
Make sure the camera network connection is
normal.
Try restarting your network router.
Check the camera's cable connection. If
successfully connected, the network connection indicator will
flash green 3 times every 3 seconds.
2) If you are still unable to access your camera, restart the camera or press
and hold the Reset Button for 5 seconds to restore to factory settings.
To Next Page
Loading...
Need help?
General