Tapco 6912 - Appendix C: Specifications

12
Appendix C: Specifications
6912 Specifications
System
System Type: Two-way, full-range loudspeaker
Frequency Range (–10 dB): 49 Hz to 18 kHz
Sensitivity (1W @ 1m): 99.9 dB SPL
Nominal Impedance: 8 ohms
Power Handling: 250 watts continuous
500 watts program
Transducers
Low Frequency: 12 in/305 mm woofer, vented
High Frequency: 1 in/25 mm tweeter,
Physical
Input Connectors: One 1/4” TS jack,
one Speakon jack, paralleled
Enclosure:
Wood with textured black
PVC vinyl covering
Dimensions:
Height: 25.6 in/65.1 cm
Width: 17.8 in/45.1 cm
Depth: 15.6 in/39.6 cm
Weight: 49 lb/22 kg
Mounting: Pole-mountable
DESIGNED IN WOODINVILLE, WA, USA
MANUFACTURED IN CHINA.
"TAPCO" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
©2006 LOUD TECHNOLOGIES INC.
25.6 in/
65.1 cm
17.8 in/
45.1 cm
15.6 in/
39.6 cm
13.8 in/
34.9 cm
17.8 in/
45.1 cm
6912 Dimensions
LINK
INPUT EXTENSION
IN OUT
TAPCO 69 SERIES / 6915
POWER
300 Watts
IMPEDANCE
8 Ohm
DESIGNED IN WOODINVILLE, WA, USA
MANUFACTURED IN CHINA.
"TAPCO" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
©2006 LOUD TECHNOLOGIES INC.
28.1 in/
71.4 cm
17.8 in/
45.1 cm
15.6 in/
39.6 cm
13.8 in/
34.9 cm
17.8 in/
45.1 cm
6915 Dimensions
6915 Specifications
System
System Type: Two-way, full-range loudspeaker
Frequency Range (–10 dB): 47 Hz to 18 kHz
Sensitivity (1W @ 1m): 101.1 dB SPL
Nominal Impedance: 8 ohms
Power Handling: 300 watts continuous
600 watts program
Transducers
Low Frequency: 15 in/381 mm woofer, vented
High Frequency: 1 in/25 mm tweeter,
Physical
Input Connectors: One 1/4” TS jack,
one Speakon jack, paralleled
Enclosure:
Wood with textured black
PVC vinyl covering
Dimensions:
Height: 28.1 in/71.4 cm
Width: 17.8 in/45.1 cm
Depth: 15.6 in/39.6 cm
Weight: 51 lb/23 kg
Mounting: Pole-mountable