Technical Specifications
Mono input channels
Microphone input electronically balanced, discrete input configuration
Frequency response 10Hz to 55kHz, +/-3dB
Distortion (THD&N) 0.005% at +4dBu, 1kHz
Gain range 0dB to 50dB(MIC),
SNR (Signal Noise Rated) 100dB
Line input electronically balanced
Frequency response 10Hz to 55kHz, +/-3dB
Distortion (THD&N) 0.005% at +4dBu, 1kHz
Sensitivity range +10dBu to –40dBu
Stereo input channels
Line input unbalanced
Frequency response 10Hz to 55kHz, +/-3dB
Distortion (THD&N) 0.005% at +4dBu, 1kHz
Impedances
Microphone input 3.6Kohm.
All other inputs 10Kohm or greater.
Tape out 1Kohm.
All other output 120ohm.
Equalization
Hi shelving +/-15dB @12kHz
Mid shelving +/-15dB @2.5kHz
Low shelving +/-15dB @80Hz
Main Mix Section
Noise (Bus noise) Fader 0dB, all input channels assigned
and set to UNITY gain:-90dBr(ref.:+4dBu)
Max output +22dBu unbalanced, 1/4” jacks
AUX Sends max out +22dBu
Power supply(AC/AC Adaptor)
Main voltage USA/Canada 100-120V~, 60Hz
Europe 210-230V~, 50Hz
U.K./Australia 240V~, 50Hz
Power Consumption 11.2watts
Physical
Dimension (W*D*H) 259mmX219mmX50/48mm(10.20”X8.62”X1.97”/1.89”)
Net weight 1.40Kg (3.08lb)
Shipping weight 2.05Kg (4.51lb)
To Next Page
Loading...
