Tar River BFM-506 - Maintenance

17
BFM-505, 506, 507 Finish Mower
Operating Instructions
Operating Instructions Attaching to Tractor Attaching PTO Shaft
Maintenance:
Maintenance is crucial for the working life and efficiency of any agricultural equipment. If the equipment is
properly maintained and operated, a long working life and operator safety are assured.
The maintenance intervals indicated in this booklet are provided as a mere reference and are related to normal
working conditions; changes may occur depending on the type of activities, environmental dust, seasonal
factors, etc.
First check
After 50 working hours, check the oil in the gearbox (A) and make sure that all the screws and bolts are
tightened.
Maintenance
Caution: Before injecting lubricating grease into the grease fittings, clean the fittings
to prevent mud, dust, or any other foreign matter from contaminating the grease and
reducing the lubrication effect.
When adding or changing the oil, use the same type of oil to prevent mixing oils with
different features.
All maintenance activities must be carried out with the mower resting horizontally
on the ground, with the equipment off and not overheated.
After using the equipment for a few hours, make sure that all the bolts are tightened;