Targa W730-P4 - Removing Memory Module

Memory User's Guide
Page 3-2
3.1 Removing Memory Module
Below is the procedure on how to remove the memory module.
To insert the memory module, reverse the steps above.
• Make sure the system is properly
shutdown.
• Flip the system upside down.
• Remove the screw as shown by #1.
• Remove the compartment door as
shown by #2.
The Groove
• Press the spring-locks sideways as
shown by #1.
• The memory module would pop up
as shown by #2.
• Remove the memory module as
shown by #3.