13
DISPLAY
The display must be mounted so that it is visible and easily accesible for the driver. There
are three cable slots allowing you to route the cable from the left, right or bottom of
the display (depending on the mounting position). If you bring the cable in from the
bottom, slide the loose sleeve over the wires to protect and hide them. Slide the loose
shrink sleeve out of the way if you are using the left or right cable routes. When you have
decided your cable route you can use the double sided sticky tape to mount the display
in the best position for the driver. The shielded 5m. cable between the central unit and
the display MUST NOT be cut, shortened or extended! The display can also be installed
in the rearview mirror. The leds will be visible through the glass and the buttons will
be replaced with micro switches in the bottom of the mirror housing. Installation of the
display in the rearview mirror will be arranged by Track Technologies.
Thanks to it’s slim design the display can be mounted horizontally on the dashboard so
the leds reflect on to your windscreen and are visible to the driver.
To Next Page
Loading...