The diagrams following show how to securely attach the castor wheels so that your Oil
Filled Heater can easily be wheeled from room to room.
The first step is to attached the castor wheels to their mount brackets.
NOTE: It Is Very Important that the castor wheels and mounting plates are fitted correctly.
• Unscrew the Dome Nuts from the castor wheels.
• Fit the castor wheel end through the mounting plate and screw on the Dome Nut.
Tighten with a spanner.
• Do the same for the other three castor wheels.
For fitting the castor wheels to the heater, Ensure the
heater is not plugged into the power point.
Page 10 of 20
To Next Page
Loading...