EasyManua.ls Logo

Target T11FOCH16 - When the Appliance is Not in Use; Cord Storage; Storage

Target T11FOCH16
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 When the Appliance is Not in Use
8.1 Cord Storage
Wind the cable around the cord storage bracket (Do Not wind on tight) and the plug can
be inserted into the bracket if desired as shown.
8.2 Storage
When the appliance is not in use or is not going to be used for a long period, disconnect
from the electricity supply and store in a dry safe place.
Ensure the heater is standing upright and not on its side or upside down.
Page 16 of 20