12
Targus Notebook Security DEFCON
®
Ultra Combination Cable Lock
Changing the Motion Alarm from
Low to High Sensitivity
If the motion alarm is set to low sensitivity and you want
to change it to high, press and hold the motion alarm but-
ton until you hear three beeps. The status light flashes
three times every second indicating that the motion alarm
is rearmed to high sensitivity.
NOTE: T
O CHANGE THE MOTION ALARM FROM HIGH SENSITIVITY TO LOW, YOU
MUST
DISARM THE MOTION ALARM BY UNLOCKING THE DEFCON ULTRA AND
THEN
REACTIVATE THE MOTION ALARM AS PREVIOUSLY DESCRIBED.
Disarming the Motion Alarm
To neutralize the motion alarm and turn off the siren,
unlock the DEFCON Ultra. See “Unlocking the DEFCON
Ultra” on page
7 for more information.
Using the DEFCON Ultra Security
Lock Adapter
For your convenience, the DEFCON Ultra comes with a
Security Lock Adapter (SLA) that enables you to secure
your notebook computer with the DEFCON Ultra. In addi-
tion, the length of the cable allows you to simultaneously
secure your computer with other property, such as a car-
rying case.
NOTE: T
O USE THE SECURITY LOCK ADAPTER, YOUR NOTEBOOK COMPUTER
MUST
HAVE A SECURITY LOCK SLOT.
To Next Page
Loading...
