EasyManua.ls Logo

Targus DEFCON - Installing the Batteries

Targus DEFCON
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Targus Notebook Security DEFCON
®
Ultra Combination Cable Lock
Before adjusting the cable length, enter the current com-
bination and unlock the DEFCON Ultra.
To extend the cable:
1 Press and hold down the trigger.
2 Pull the cable away from the unit.
3 Let go of the trigger to set the cable length.
Repeat the above steps until the cable reaches the
length you want.
To retract the cable, or shorten the length, press and hold
down the trigger while guiding the cable into the unit. Let
go of the trigger when you have finished rewinding the
cable.
WARNING: T
HE CABLE RETRACTS QUICKLY AND MAY CAUSE THE PLUG HEAD
TO
WHIP AROUND IF NOT CONTROLLED. TO AVOID POSSIBLE PROPERTY
DAMAGE
OR PERSONAL INJURY WHEN RETRACTING THE CABLE, PRESS AND
RELEASE
THE TRIGGER IN A PULSING MOTION SO THAT IT REWINDS SLOWLY.
Installing the Batteries
The DEFCON Ultra is equipped with a two-level motion
alarm feature. To use this feature, or to hear the alarm
siren if the cable is tampered with, you must install three
AAA batteries.
To prevent a potential thief from silencing the alarm, the
battery cover is designed to lock when the DEFCON
Ultra is locked. To add or change the batteries:
1 Using the dials, enter the current combination.

Related product manuals