Why doesn't Tascam Recording Equipment play when I hit play?
If your Tascam 788 doesn't play when you hit PLAY, it might be due to a couple of reasons. First, you may be in a quiet part of the song, so go to a section where audio has been recorded. Second, check that the SYNC SRC is set to INT, not EXT.
What to do if Tascam 788 Recording Equipment is out of time from the source?
If your Tascam 788 is out of time from the source, there are a couple of things you can check. First, look for any MTC offsets that don’t belong. Second, ensure that you have MIDI Time Code enabled to lock the machines with time code.
How to fix pitch wavering and sound cutting out when locking Tascam 788 to another source?
If you're experiencing pitch wavering and sound cutting in and out when locking your Tascam 788 to another source, the issue might be due to different MTC frame rates. Make sure the frame rate is the same on both your master machine and your 788.
What to do if I can’t hear the input submixer on my Tascam 788?
If you can’t hear anything you’ve assigned to the input submixer on your Tascam 788, the input submixer is probably disengaged from the stereo buss. Press and hold SUB MIX to engage it.
How to hear changes when adjusting EQ on Tascam 788 Recording Equipment?
If you're changing the EQ on your Tascam 788 and not hearing the changes, make sure the channel EQ is turned on and add some gain to the FREQ or Q rows.
How to hear the metronome on Tascam 788 Recording Equipment?
To hear the metronome on your Tascam 788, ensure that the SYNC SRC is set to CLOCK.
General| Type | Digital Multitrack Recorder |
|---|---|
| Number of Tracks | 8 |
| Simultaneous Recording Tracks | 8 |
| Simultaneous Playback Tracks | 8 |
| Sample Rate | 44.1 kHz |
| Bit Depth | 16-bit |
| Inputs | 8 XLR/TRS combo inputs |
| MIDI | Yes |
| CD Burner | No |
| Display | LCD |
| Outputs | Stereo outputs, headphone output |
| Built-in Effects | Reverb, Delay |
| EQ | 3-band EQ |
To Next Page
