Panel lock function
When in shift mode (when the SHIFT indicator is lit),
press and hold the DISPLAY [LOCK] button to turn the
panel lock function on or off. When it is on, all the buttons
on the front panel of the unit (except the SHIFT and
DISPLAY [LOCK] buttons) and the remote control are
disabled.
LOCKED
will appear on the display if you push
any of the buttons.
NOTE
Even when the panel lock function is enabled, the
•
unit can be controlled by a TASCAM RC-3F foot switch
connected to the REMOTE jack on the front panel
and external controllers connected to the RS-232C
connector and CONTROL I/O PARALLEL connectors
on the rear panel.
The panel lock setting (on/off) is saved even if the unit
•
power is turned off.
3 – Preparation
To Next Page
Loading...
