DA-3000 Product Spec Sheet
-
1- TEAC CORPORATION
Oct, 2013
Product Spec Sheet
Stereo Master Recorder/ADDA Converter
DA-3000
■ Main Features
●High-Performance Master Recorder
>Stereo recording at high sampling frequencies of up to 192kHz PCM and 5.6MHz DSD
>Variety of inputs and outputs to handle diverse recording situations
>Upgraded user interface
>Simultaneous multitrack recording and playback with multiple cascaded units
●High-Quality Audio Circuits Enable Use for the DA-3000 as an ADDA Converter
>Dual mono circuits eliminate interference between left and right channels
>Low noise achieved with fully balanced circuitry and high-quality AD converter
>Numerous high-quality parts selected carefully using evaluation tests
>Power supply section and high-precision TCXO supports high audio quality
>Fanless design eliminates unwanted noise during monitoring and operation
※ Don’ t use a wireless remote controller when you use multiple units except using the cascade function.
※
Please take 1U or more of blank space above the DA-3000 for ventilation.
■ Features at a glance
・ Stereo recording to SDHC card or CF card
・ PCM recording format: BWF
(44.1/48/88.2/96/176.4/192kHz, 16/24bit)
・ DSD recording format: DSDIFF/DSF
(2.8/5.6MHz)
・ SD card slot
(supports 4 to 32GB SDHC cards)
・ CF card slot
(supports UDMA)
・ WAV file playback
・ Cascade function enables simultaneous operation of multiple units
・ Recording 2 mono files from stereo input possible
・ Mark functions can be used set up to 99 points per file
(mark information can be used in software that supports
BWF format)
・ When recording, designation of the recording file folder possible
・ Synchronized recording
using level, stop time and recording start delay time setting
To Next Page
Need help?
General
Weight and Dimensions
