Need help?Do you have a question about the Tascam DA-88 and is the answer not in the manual?
Comprehensive list of operational safety instructions and precautions.
Guidelines for operating environment, tape selection, and head cleaning.
Steps for performing the first audio recording on a tape.
Automated punch-in/out recording with rehearsal.
Adjusting crossfade time for smooth transitions.
Practicing punch-in/out points without recording.
Initiating punch-in using the RECORD button.
Using an optional footswitch for hands-free punch-in.
Establishing MEMO 1 and MEMO 2 points for tape location.
Looping playback between two set points.
Connecting and configuring DA-88 units for synchronized operation.
Assigning unique ID numbers to DA-88 units.
Explanation of WARNING LED and error indicators.
Comprehensive list of operational safety instructions and precautions.
Guidelines for operating environment, tape selection, and head cleaning.
Steps for performing the first audio recording on a tape.
Automated punch-in/out recording with rehearsal.
Adjusting crossfade time for smooth transitions.
Practicing punch-in/out points without recording.
Initiating punch-in using the RECORD button.
Using an optional footswitch for hands-free punch-in.
Establishing MEMO 1 and MEMO 2 points for tape location.
Looping playback between two set points.
Connecting and configuring DA-88 units for synchronized operation.
Assigning unique ID numbers to DA-88 units.
Explanation of WARNING LED and error indicators.
General| Type | Digital Multitrack Recorder |
|---|---|
| Tracks | 8 |
| Bit Depth | 16-bit |
| Quantization | Linear PCM |
| THD+N | < 0.05% |
| Total Harmonic Distortion | < 0.05% |
| Dynamic Range | > 90 dB |
| Signal-to-Noise Ratio | > 90 dB |
| Media | Hi8 Tape |
| Tape Format | DTRS |
| Sampling Rate | 48kHz, 44.1kHz |
| Frequency Response | 20 Hz to 20 kHz |
| Sync | MIDI Time Code, Word Clock |
| Remote Control | Optional |
| Inputs | 8 x XLR (analog), 1 x RCA (digital) |
To Next Page
