Tascam DA-38 - Section 11: Appendices; Error Messages Explained

SECTION11 :APPENOlCES
1 11-3. Error Messages Explained
When referenced
No clock is coming into the WORD IN,
oming clock’s frequency is
Plug in the correct clock.
another DA-38
selected on the slave.
Turn off the unit, then turn on it
beyond the limit and winding problems occurred.
us?. Turn off the unit, and turn on it
before continuing to use the unit.
The reel motor could not work correctly in time.
Turn off the unit, and turn on it again
re continuing to use the unit.
tape after turning on
11*3