TASCAM DP-24
1
DP-24
ReleaseNotes
D01174200B
Notice
Always use the most recent firmware for this device.
Please visit the TASCAM web site (http://tascam.com) to
check for the latest firmware.
Maintenance items
V1.02 changes
Some WAV format files were not recognized. This has
•
been fixed.
When MMC mode was set to
•
SLAVE
, MMC REC
commands were not always received. This has been
fixed.
When the MIDI GENERATOR was set to
•
MTC
,
synchronization was sometimes lost. The stability of
MTC GENERATOR output has been improved.
Playback could become unstable after recording a 24-
•
bit, 44.1kHz song using punch-in and punch-out. This
has been fixed.
When using CD Writer to change song order,
•
sometimes canceling a change would not be reflected
correctly in the track order. This has been fixed.
The REMAIN indicator shown in
•
Mixdown
and
Mastering
modes is now calculated for recording
stereo WAV Files.
Waveforms were not always displayed correctly when
•
zoomed in or out. This has been fixed.
Values shown in the EQ pop-up were sometimes
•
incorrect. This has been fixed.
On the
•
MIXER
screen, more effects could be added
then are supported by the unit. This has been fixed.
In addition, other improvements to operation stability
•
have been made.
Checking the firmware version
Check the firmware version of your DP-24 before
conducting a firmware update.
1. Turn the unit's power ON.
2. Press the MENU button to open the
MENU
screen.
3. Use the JOG/DATA dial or CURSOR (5/b/g/
t) buttons to select the
INFORMATION
menu
(selected item appears green), and press the F4 (t)
button to open the
INFORMATION
screen.
You do not need to update the unit’s firmware if the
SYSTEM VERSION
shown here is the same as or
newer than the version that you intend to use for the
update.
To Next Page
Need help?
General
Weight and Dimensions
