Need help?Do you have a question about the Tascam iXR and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| USB | USB 2.0 |
| Bit Depth | 24-bit |
| Compatibility | iOS, Mac, Windows |
| MIDI I/O | Yes |
| Headphone Output(s) | 1 x 1/4" TRS |
| Audio Inputs | 2 x XLR/TRS combo |
| Audio Outputs | 2 x TRS |
| Phantom Power | Yes |
| Sample Rate | 96 kHz |
Overview of the iXR's audio and MIDI capabilities.
Explains formatting, symbols, and notes for clarity.
Lists brand names and legal acknowledgments.
Details the controls, inputs, and outputs on the unit's front.
Details the connectors and switches on the unit's rear.
Lists hardware and OS prerequisites for setup.
Guides on installing necessary software for unit functionality.
Step-by-step instructions for Windows driver installation.
Addresses macOS security warnings during software installation.
Step-by-step instructions for Mac software installation.
Procedures for removing installed software.
Steps to remove the Windows driver.
Steps to remove the Mac software.
Instructions for supplying electrical power to the unit.
Specific power connection methods for iOS devices.
Power connection details when used with computers.
General guidance for connecting external devices.
How to connect the unit to an Apple iOS device.
How to connect the unit to a computer via USB.
General overview of audio signal routing and monitoring.
Instructions for connecting various types of microphones.
Guidance on connecting speakers for audio monitoring.
Instructions for connecting MIDI hardware devices.
Method to access the unit's control application.
Explanation of the user interface elements of the Settings Panel.
Instructions on how to open settings on an iOS device.
Instructions on how to open settings on a Windows computer.
Configures the direct monitoring signal path and mode.
Adjusts audio buffer to manage latency and stability.
Controls the activation status of individual audio input channels.
Selects which audio signals are sent to the line outputs.
Manages automatic software and firmware updates.
Describes the unit's operation without a connected computer or iOS device.
Details configuration options available when not connected.
Guides on configuring Digital Audio Workstation software.
Helps choose the correct driver for specific Windows tasks.
Setup instructions for the Cubasis LE audio application.
Setup instructions for the Cubase LE audio application.
Configuration for audio output in macOS and iTunes.
Technical reference for MIDI message transmission and recognition.
Solutions for issues preventing software installation.
Troubleshooting steps for power-related problems.
Steps to fix device recognition issues.
Solutions for audio glitches and unwanted noise.
Advice on trying different USB ports to resolve issues.
Specifies sampling frequencies and quantization bit depth.
Technical details of audio signal levels and impedances.
Specifications for line and headphone outputs.
Key performance metrics like EIN, frequency response, and S/N ratio.
Lists the necessary system and OS specifications for use.
Identifies the types of drivers compatible with the unit.
Information regarding power sources, consumption, and requirements.
Details on the included Digital Audio Workstation software.
Visual representation of the unit's physical dimensions.
To Next Page
